Make sure, having sat the doughnut on square, that you tighten the bracket nuts equally otherwise you will get the same problem. Rated 4 out of 5 by locumsparky from close coupled fixing kit fairly easy to fit. Here is how to fit a close coupled toilet.
Close Coupling Kit for Close Couple Toilet Viva
When the installation is complete, turn the water supply on and check for leaks.
+44 (0)3300 535899 // [email protected]
Place inlet valve (f) through inlet hole with rubber washer (g) inside the cistern. Failure to follow these instructions may result in damage to the product and property damage. Align the waterline mark on the valve with the waterline mark in the cistern then rotate the valve to lock into position, replace the blue locking plug (a) hob wahx twford bathrooms The toilet is ideal standard m360, very old so i had to struggle to remove the bolts, wing nuts etc with some help from dw40.
I put the new siphon with the washer in the cistern.
I'm pretty sure it just needs the syphon replaced, but when i removed the cistern i found that the connection for the closed coupling system on the pan is not standard. Place the flush valve mechanism into the cistern; Some instructions would've made it a little easier, eg which way round to fit the doughnut and which way up for the plastic plate. Slide the bottom threaded section through the.
Close coupling toilet cistern kit.
My toilet flush gave up the ghost a few days ago. The close coupling kit below shows the doughnut and the fixing bracket underneath. Close coupling kit, for connecting toilet cistern to bowl, includes recessed plate, two bolts, wing nuts, washers and dome doughnut washer. To adjust the inlet valve height, (turn off water supply if connected) remove blue locking plug (a) and rotate valve and lift to adjust the height.
For twyford close coupled toilet pans
Our range of designer close coupled toilets offer a broad range of styles, from traditional […] To replace the coupling plate of a close coupled toilet: Close coupling kit, for connecting toilet cistern to bowl, includes recessed plate, two bolts, wing nuts, washers and dome doughnut washer plumbing and heating suppliers for everyone customer service: Place the wc into position and mark the position of the screw holes and the outer edge of the wc foot.
Remove mounting bolts and lift bowl off toilet flange.
The close coupling kit consists of a donut bracket, bolts that fit on either side. Slide bolt (i) through washer (j) and sealing washer (k) then place Outside the cistern, i put the metal braket and on top of the metal bracket, i put the doughnut washer (upside. Make sure you include the rubber sealing rings.
Close toilet supply valve and flush the toilet.
Shut off water before installation. You'll find that the bolts have a thick density which means they won't snap when connected. Ideal standard close coupling ring washer doughnut toilet wc cistern x 1 close coupling washer for ideal standard toilet cistern high quality rubber replacement replacement external diameter 110mm internal diameter 80mm. Turn the water supply off.
Secure the brackets using the hexagonal head screws and washers, the plastic plugs are for use when fixing to concrete or ceramic tiled floors.
Bulk save save up to 5%. Start by fitting the cistern parts using the instructions provided. The pan has four bolt holes instead. Close coupling bolt kit designed to bolt straight through the cistern onto the pan with all washers, nuts and bolts to suit.
If the plumbing is up to date the fill valve of the cistern will be connected via a flexible connector with a built in.
Close coupled back to wall toilet fitting instructions close coupled toilets are very popular as the pan and cistern are “closely coupled” together, saving space and installation time as well as being the classic toilet shape that most people recognise. This twyford cistern fixing kit connects a standard cistern tank with no screw holes in the base onto a close couple pan. Does your toilet have one of the following wc, and the concealed installation offers flexibility vitra's rimless wc pan eliminates the vitra bathroom products are designed to combine. Qty price per item saving;
If you’re replacing an old toilet, you’ll already have access to the waste pipe and the water inlet.
It's a twyford toilet, was in the house when i bought it, and probably +30 years old. Sponge any remaining water from the bowl. Close coupled toilet cistern unit. Ideal standard rubber doughnut close coupling washer armitage shanks e730067.
Removing the cistern lid for access.
The metal plate is fixed to the tank base by inserting over an extruding flush outlet and tightened. Secure with backnut (h) but ensure float moves freely up and down flush valve. Suitable for standard cistern tank; If replacing valve, first shut off the main water supply.
Replace the wc into position and secure using countersunk.
Nothing a quick youtube video couldn't sort. Connect the cistern to the pan. These instructions may result in personal injury, damage to the product or property damage. Disconnect the inlet valve from the supply.
Be sure your installation conforms to local codes.
