Suitable for use in hot and tropical climatic conditions. * creamy paint consistency, maximum 4 gal/bag. Improves the bond between old concrete and new concrete and as a fortifier, improves strength, adhesion, and durability.
SikaLatex 5 Gal. Acrylic Latex Bonding Agent and Admixture
Uses sikalatex® is used as bonding agent and site.
It comes in the form of a milky liquid.
Utilise le sikalatex pour ses bonnes accrochage Improved adhesion to prepared substrates. This low voc formula is ideal for bonding new concrete to existing concrete. It is suitable for tropical conditions.
El mezclado, colocación y curado de la mezcla debe efectuarse siguiendo las normas habituales.
Primer for acrylic coatings only. Sikalatex® my is a modified styrene butadiene emulsion to be mixed with cement (neat) or cement / sand mortar for improved adhesion and water resistance properties. Acrylic latex, bonding agent and admixture for cement mortar and concrete. Wash off with soap and plenty of water.
Mortier 1 volume de ciment
Increased adhesive strength of mortar/concrete when used as a bonding agent or as a bonding grout. Sikalatex® se adiciona diluido en agua de amasado del Take off contaminated clothing and shoes immediately. Within the mixing time add additional gauging.
It also improves adhesion characteristics and requires no wait time before applying a top coat.
Increases resistance to freeze/thaw cycling. Suitable for use in hot and tropical climatic conditions. 1 part cement, 2 parts sand, undiluted sikalatex®*. Flush eyes with water as a precaution.
Sikalatex® 020301010010000001 adhesivo y reforzador para mezclas cementicias created date:
Increases ultimate compressive strengths of mortars and concrete. The benefits of sikalatex® include, but are not limited to the following: Increases adhesion, flexural and tensile strength. Sikalatex® r revision date 02/28/2018 print date 02/28/2018 2 / 8 in case of skin contact :
Sika latex r is also a bonding grout when mixed with sand and portland cement.
The main advantages of sikalatex® are: Improves abrasion resistance (less dusting) reduces water permeability. Mix sikalatex® with the correct amount of water to produce a gauging solution. Very porous concrete may require a second coat.
Pour part of the gauging solution into a suitable mixing container.
Uses sikalatex® is used as bonding agent and site. Appliquer la couche de finition. Can be applied by brush, spray or roller. Keep eye wide open while rinsing.
Sikalatex® sp is a synthetic rubber emulsion for adding to cement mortars, where good adhesion and water resistance are required.
In case of eye contact : Mix sikalatex® kh with the correct amount of water to produce a gauging solution. Sikalatex® is a synthetic rubber emulsion which when added to cement slurry / cement mortar / concrete / cementitious grout provides good adhesion and water resistance. Sikalatex® se adiciona diluido en agua de amasado del mortero en una proporción comprendida entre 1:2 a 1:5 ( sikalatex® :
Sikalatex® is a synthetic rubber emulsion that is used as admixture for cementitious bonding bridges and high quality mortars.
Toujours appliquer la couche suivante de mortier « frais sur frais » sur le pont d'adhérence. Bonding agents, mortars and concrete containing sika latex r exhibit better adhesion to prepared substrates in comparison to unmodified materials. Laisser tirer le gobetis (dur à l’ongle) avant d’enduire la paroi. It is fully soluble in water and is to be added directly to the gauging water of slurry / mortar / concrete / grout.
Sikalatex réalisé avec un sable grenu pour obtenir une surface d’accrochage rugueuse.
Preparación de yeso con sikalatex®: Mix sikalatex® with the correct amount of water to produce a gauging solution.
