Sika latex r is also a bonding grout when mixed with sand and portland cement. Our brands include sikaflex, sarnafil, greenstreak, fibermesh, butterfield & parex. Sikalatex® r revision date 08/17/2020 print date 08/17/2020 1 / 8 section 1.
Sikalatex R 471643 Bonding Agent and Admixture 1 QT Jug
Most important symptoms and effects, both acute and
Improves the bond between old concrete and new concrete and as a fortifier, improves strength, adhesion, and durability.
Sikalatex® r revision date 11/15/2013 print date 11/18/2013 2 / 8 remove contact lenses. Add 1 part cement, 2 parts sand, and a sufficient amount of sikalatex® r to produce a creamy paint consistency. Sikalatex® r to prepared concrete substrate using brushes, rollers, soft brooms, or spray. Wash off with soap and plenty of water.
In case of eye contact :
Improved adhesion to prepared substrates. Apply the repair mortar immediately, before the bonding agent dries. Increases ultimate compressive strengths of mortars and concrete. Learn more about our brands, products, and solutions.
Keep eye wide open while rinsing.
Never give anything by mouth to an unconscious person. Do not give milk or alcoholic beverages. It also improves adhesion characteristics and requires no wait time before applying a top coat. Wash soiled hands and skin thoroughly in.
In case of skin contact :
Flush eyes with water as a precaution. Sikalatex r is an acrylic polymer latex. Clean mouth with water and drink afterwards plenty of water. Add 1 part cement, 2 parts sand, and a sufficient amount of sikalatex® r to produce a creamy paint consistency.
Check out the instructional video below.
Brush the mixture with a stiff bristle brush into the entire area to be resurfaced. 2/2 sika® latex r csc master formattm 03 30 00 ^d s/e sw> ke z d clean up clean all tools and equipment immediately after use with water. In case of eye contact Sikalatex® em rebocos para obter uma boa aderência dos rebocos ao betão liso e sobre todas as alvenarias:
Make sure the entire surface and all edges are covered.
Take off contaminated clothing and shoes immediately. Sikalatex r solution, aggregate, cement. Sika latex r is also a bonding grout when mixed with sand and portland cement. Take off contaminated clothing and shoes immediately.
Wash off with soap and plenty of water.
Sikalatex® r version 1.1 revision date: 100000012380 2 / 7 general advice : The ratio is 1 part cement, 2 parts sand, and a sufficient amount of undiluted sikalatex r to produce a creamy paint consistency. Keep eye wide open while rinsing.
Sika latex r is also a bonding grout when mixed with sand and portland cement.
Increased adhesive strength of mortar/concrete when used as a bonding agent or as a bonding grout. This low voc formula is ideal for bonding new concrete to existing concrete. Acrylic latex, bonding agent and admixture for cement mortar and concrete. Can be applied by brush, spray or roller.
Sika corporation 201 polito avenue lyndhurst, nj 07071 usa www.sikausa.com.
• gafas y de seguridad y guantes impermeables • el galón de sikalatex r • recipiente de mezclado • cepillo de alambre procedure como puente de adherencia 1. (7 m2/l) sikalatex® r primer may be applied up to 24 hours ahead providing the area is kept dry and clean. Increases resistance to freeze/thaw cycling. Immediately trowel sikalatex r mortar or concrete mix into areas to be patched.
Sikalatex r concrete bonding adhesive/acrylic fortifier is an acrylic bonding agent and admixture for use with concrete, mortar and grout.
Brush the mixture with a stiff bristle brush into the entire area to be resurfaced. Uses admixture (replacing water) used in cement based Sikalatex is also a bonding grout when mixed with sand and portland cement. Sikalatex® r revision date 02/28/2018 print date 02/28/2018 2 / 8 in case of skin contact :
(7 m 2 /l) sikalatex r primer may be applied up to 24 hours ahead providing the area is kept dry and clean.
No hazards which require special first aid measures. Make sure the entire surface and all edges are covered. Sika usa is a leading supplier of specialty products and solutions for the construction, industrial manufacturing & automotive markets. Very porous concrete may require a second coat of sikalatex r to seal the surface.
Bonding agents, mortars and concrete containing sika latex r exhibit better adhesion to prepared substrates in comparison to unmodified materials.
Once hardened, the product can only be removed manually or mechanically.
.png)
