Make sure the entire surface and all edges are covered. Latex r to produce a creamy paint consistency. Add sikalatex® r to repair mortar or concrete instead of water, and mix to a desired consistency.
SikaLatex® R Concrete Fortifier SIKA
Wash off with soap and plenty of water.
Immediately trowel sikalatex r mortar or concrete mix into areas to be patched.
Brush the mixture with a stiff bristle brush into the entire area to be resurfaced. The main advantages of sikalatex® are: This low voc formula is ideal for bonding new concrete to existing concrete. Sikalatex r added to produce a creamy consistency.
Admixture (replacing water) used in cement based.
Increases resistance to freeze/thaw cycling. Fine sand = 1 : The ratio is 1 part cement, 2 parts sand, and a sufficient amount of undiluted sikalatex r to produce a creamy paint consistency. Sika latex r is also a bonding grout when mixed with sand and portland cement.
Bonding coat for rendering/ bonding between old and new concrete.
Increased adhesive strength of mortar/concrete when used as a bonding agent or as a bonding grout. Increased resistance to freeze/thaw durability. Take off contaminated clothing and shoes immediately. Add sikalatex r to repair mortar or concrete instead of water,
Use in patching and flashcoats.
Read honest and unbiased product reviews from our users. Sikalatex® r revision date 02/28/2018 print date 02/28/2018 2 / 8 in case of skin contact : Add more sikalatex r as desired. Water resistant bonding agent and mortar admixture.
Suitable for use in hot and tropical climatic conditions.
Check out the instructional video below. Use with stucco and terrazzo. This low voc formulation is ideal for bonding new concrete to old. Improves the bond between old concrete and new concrete and as a fortifier, improves strength, adhesion, and durability.
Add more sikalatex r as desired.
Flush eyes with water as a precaution. Plastic concrete to hardened concrete 28 days >500 psi (3.4 mpa) no wait time before applying top coat improves resistance to freeze/thaw cycles spray, roll or brush on improves adhesion characteristics Improved adhesion to prepared substrates. Keep eye wide open while rinsing.
Acrylic latex, bonding agent and admixture for cement mortar and concrete.
Admixture used in cement based products to improve adhesion, achieve a denser surface, and improve overall performance. Sikalatex r solution, aggregate, cement. Apply the repair mortar immediately, before the bonding agent dries. The main advantages of sikalatex® are:
Add the dry sand and cement mixture to the latex water solution and mix until as even creamy consistency is achieved.
It also improves adhesion characteristics and requires no wait time before applying a top coat. Follow the concrete or mortar instructions to correct proportions. Use as an admixture in mortar and concrete to improve adhesion and achieve a denser surface. Follow the concrete or mortar instructions to correct proportions.
Bonding agents, mortars and concrete containing sika latex r exhibit better adhesion to prepared substrates in comparison to unmodified materials.
Add sikalatex® r to repair mortar or concrete instead of water, and mix to a desired consistency. Maximum 4 gal./sack of cement (15l/sack of cement). Increased adhesive strength of mortar/concrete when used as a bonding agent or as a bonding grout. It also improves adhesion characteristics and requires no drying wait time before applying a top coat.
In case of eye contact :
As a bonding grout when mixed with sand and portland cement. Sika latex r is also a bonding grout when mixed with sand and portland cement. 1 (by volume) dry mix: It can be used in patching, flash coats, stucco, and terrazzo.
Sikalatex r concrete bonding adhesive/acrylic fortifier is an acrylic bonding agent and admixture for use with concrete, mortar and grout.
