Pc is popularly used as an engineering plastic owing to its unique features that include: Contact with humidity may result in a change of properties. Astm d 3935 defines the properties of polycarbonate resin.
Clifton Rubber Rubber Compound Characteristics
Film, bags, pipe and tubing, permeable by hydrocarbons, alcohol, insulating sleeves, bottle stoppers, and gas;
This composition can be done on a physical basis (e.g., polymer blends or composite materials) or on a chemical basis (copolymers).
Unfilled polycarbonate is a tough, transparent engineering thermoplastic which offers very high impact strength and high modulus of elasticity. 1.20g/cm³ mechanical properties parameter value unit din /en/iso tensile strength at yield 50mm/min 60 mpa 527 tensile strength at break 50mm/min 70 mpa 527 tensile strain at yield 50mm/min 6 % 527 Polyamide thermoplast with high temperature stability, extremely solid and tenacious. Though the characteristics of polycarbonate are similar to.
All values are measured at least after 48 hours storage at 23°c/50% relative humidity.
Polycarbonate is best known for its impact resistance but has additional properties like: It also has a high heat deflection temperature and absorbs very little moisture. Resistant to x rays and lids, plastic wrap, toys chemical agents polypropylene (pp) ch3 thermoplastic; Polycarbonate (pc) is a thermoplastic polymer that contains carbonate groups in its chemical structures.
Make it a good choice for 3d printed prototypes, parts and tools that demand higher material properties than abs or asa.
Polycarbonate sheet thermoforms well, is easy to paint, and bonds well using machine and have excellent dimensional stability. All properties are measured on injection molded samples. It thermoforms well, is easy to paint, and bonds well using solvent cements or adhesives. Polycarbonate has outstanding impact resistance over a wide temperature range as well as fairly good heat resistance.
Fdm pc is available in white and is compatible with both breakaway and soluble support.
Good ageing stability and weathering resistance. This thermoplastic material is easily machined and. General purpose polycarbonate sheet has a polished surface, is uv stabilized, and is often used in glazing. The specification covers unfilled and reinforced polycarbonate and polycarbonate copolymer materials suitable for injection molding, blow molding, and extrusion.
These typical values are notintended for specification purposes.
Unfilled polycarbonate materials are classified into groups according to their composition. Good sliding properties and high capacity of resistance to wear. Lexan ® offers an excellent combination of toughness, dimensional stability and heat and flame resistance. Polyethylene polybutadiene oyet ye e polypropylene nylon 6 yp py polyvinyl chloride polycarbonate polystyrene polyethylene terephthalate polyyytetrafluoroethylene.
•soften when heated, harden upon cooling • hardened when heated •due to chemical cross links •can be re‐softened • limited upper.
Polycarbonate sheet, rod, and tube are easy to machine and have excellent dimensional stability. These properties, plus good low frequency and high voltage insulating characteristics, make polycarbonate a prime material for electrical and electronic. It has excellent heat resistance and strength. Lexan polycarbonate provides broad design versatility through its wide range of viscosities and product options such as:
Technical data sheet lexan (pc) polycarbonate.
Creep resistance is also excellent across a broad temperature range. However, they are not guaranteed and they should not be used to establish material specification limits nor used alone as the basis of design. Pc is a polycarbonate fdm® filament that brings the attributes of this industrial plastic to 3d printing applications. Household items, plastic wrap, |.
Material properties of plastics 1.1 formation and structure the basic structure of plastics (or polymers) is given by macromolecule chains, formulated from monomer units by chemical reactions.
Polycarbonate is a tough, transparent plastic material with outstanding strength, stiffness, and is impact resistant even at low temperatures.
