If your swimming pool cleaner is just not starting up, then one thing to verify is definitely the power connection. If the meter shows 29v, you are getting power to the motor. Purchase or repair or recycle one?
Maytronics Power Supply PCB Assy 115v DYN+Reset
Turn the power supply off.
After the leaves have changed colors and the days have turned colder, it’s time to.
Remove it and check for continuity. Do not buy any maytronics (sold under many names) devices. Prevention is the best remedy. • when available, using bluetooth connectivity, sync with the maytronics tech app.
Maytronics will approve the return of the defective unit by sending a prepaid fedex label and service call documentation to the dealer prior to the dealer shipping the defective unit back to maytronics us.
Check that the power cable is securely connected all the way into the power supply. 4.7 out of 5 stars. How do you test a maytronics power supply? The power supply is too far from the smart device, or your bluetooth® is.
Maytronics power supply not work.
Going to start a thread to see if anyone has attempted this. The power supply is not waterproof. Then place the meter probes into the plug on the motor end of the cable. Testing the power supply connect the tester to the power supply.
Plug the power supply into an electrical outlet.
Take it to your local dealer for further testing or call maytronics. Check the label on your transformer for voltage output and type. Can not connect to your robot via bluetooth®, and the communication led is blinking blue. C3, c4, c5, 3001, pro x2, odyssey, wave 90, wave 100, m5.
Check that the power supply is plugged in and turned on.
Turn unit upside down and turn the power supply on. Switch the power supply on. If they are working, then replace the power supply and proceed to test the cable. Dolphin swimming pool cleaners require to have to be attached to the power supply which is then connected to an electric outlet.
To check your maytronics diagnostic power supply, use a multimeter set to 200vdc.
Wait 30 seconds, then turn it back. If the tester light is on, proceed to test the cable. I am not a technician but i am persistent and. Dolphin deluxe power supply not working not rated yet had an electrical storm the other night that among other things seems to have rendered my dolphin power supply useless.
Output voltage should be about 38 volts d/c.
Follow these steps and troubleshoot your maytronics dolphin pool cleaner quickly. Avoid operating your maytronics cleaner under any conditions that will clog the bag and prevent water circulation around the motor housing. • if the dolphin doesn’t move at all, there could be a problem with your cable. Lifestyle how your pool is the perfect background for meditation.
Please note, power supplies can only be returned when deemed defective.
Wait 30 seconds then turn it back on. I am interested if supplying 30vdc (180 watts) without the command line will make the unit run. If not, replace the amphenol plug. If cleaner not starting up.
11 rows the power supply is not switched on.
Check that the power supply is plugged in and turned on. The power supply does not include the power cord. Check power to the socket and reconnect the pool cleaner. Suggested refurbished repair price $379.55.
There are no replacement parts for the power supply.from the maytronics website:the power supply is water resistant but not waterproof.
Has been a lemon from day one. Power supply did not solve my problem in spite of diagnostic conclusion from both maytronics phone support and local (leslie pools) authorized dealer. You can program the power supply at any time. Heat will destroy the electrical components inside the case.
Place probes on each end of the plugs one at a time to make sure all the terminals are working correctly.
Dlx5, prowler 820, dx6, advantage rc plus & rc pro. Wait 30 seconds, then turn it back on. This item ships in 2 to 3 business days. The list of pool cleaners with which the power supply is compatible includes the following ones.
If you got zero readings when you tested the wire tips, you have a problem with your power supply.
Black power cable is not connected into the power supply inlet. It is possible all the brains of direction and what functions to perform are controlled by the power supply box, in that case it most likely would not work. Scroll to continue with content. If the pool cleaner does not respond, your motor is bad.
If you need the power cord in addition to the power supply please order here.
I have a dolphoin dx5. Your dealer will send your robot out for repair. Turn the power supply off. Check that the power supply is plugged in and turned on.
Please cover the power supply if inclement weather approaches.
The black power supply cord is not included. My name is mario and this is the first time. • if your power supply unit’s “power/on” button does not light up at all, you may need a replacement power supply. Check that the power cable is securely connected all the way into the power supply.
So if it fell in the pool unfortunately i think you will need a new one.
Turn on the power supply. A product tutorial overview video for maytronics's my dolphin power supply. Turn the power supply off. If the tester light is off, check the power socket and ac cable.
My dolphin’s power supply turns on, but the dolphin does not move:
Maytronics support is terrible and products are not reliable. Discussion in 'power electronics' started by martrader17, aug 19, 2021. How to how to store robotic pool cleaners. Check that the power cable is securely connected all the way into the power supply.
