The first one just stopped working. Then place the meter probes into the plug on the motor end of the cable. Check power to the socket and reconnect pool cleaner.
Is the Dolphin Oasis z5i better than the Dolphin Oasis z5
If the outlet is receiving power;
This power supply will arrive with no black power cord.
How to how to store robotic pool cleaners. Used it a couple times and now its dead. Maytronics sent me another one right away and i received it this past weekend. Plug the power supply into an electrical outlet.
Press the on button the leds will turn on and the robot will start to operate.
Turn the power supply off. If the meter shows 29v, you are getting power to the motor. It is not necessary to open the whole case, only the power switch. Check that the power cable is securely connected all the way into the power supply.
Wait 30 seconds, then turn it back.
I had my dolphin and power supply under are covered patio. Check that there is voltage in the power socket in the wall. The ground fault interrupter is switched off (closed). There may be a problem with the blue cable or the dolphin cleaner itself.
Maytronics no longer provides any of their power supplies with the black power cords.
This is an exact replacement for the power supply which came with my original dolphin. Turn the power supply off. If the pool cleaner does not respond, your motor is bad. Forget about replacing the pump and motor.
Wait 30 seconds then turn it back on.
Aquaquality pools and spas inc, is now a dealer and provider of maytronics dolphin repair service for both dolphin pool cleaners and tiger shark pool cleaners. If you have confirmed that the power supply is getting power but not coming on then it could be a fuse or a bad power supply. If it can perform these steps, try it in the pool again. If your swimming pool cleaner is just not starting up, then one thing to verify is definitely the power connection.
Check power to the socket and reconnect the pool cleaner.
If the psu turns on and the lights stay on, the problem is not with the psu. If you do need to purchase a new one, please click here to add a 5898412lf. If no program is selected, the robot will perform a single cleaning cycle. Check that the power cable is securely connected all the way into the power supply.
Unplug the blue cable from the power supply unit, and turn it on.
I reset the gfci outlet try to turn it on again it turned on for like a second me like a little pop and turned off again. Wait 30 seconds, then turn it. If you own a 9995670 power supply and it is not working any more , in many cases the reason is the power switch. Dolphin swimming pool cleaners require to have to be attached to the power supply which is then connected to an electric outlet.
Check that the power supply cable is plugged properly into the power supply socket.
Turn the power supply off. It will be oxidized by moisture. Check the label on your transformer for voltage output and type. They either require you to save and use the cord from your old power supply or purchase a new one.
It did rain but my understanding is it is able to be left out as long it is not submerged in the pool or anything.
Follow these steps and troubleshoot your maytronics dolphin pool cleaner quickly. Check that the power cable is securely connected all the way into the power supply. Maytronics dolphin repair help for your dolphin has arrived! 11 rows the power supply is not switched on.
To check your maytronics diagnostic power supply, use a multimeter set to 200vdc.
This is the newer style power supply which is wider and lower in profile material: Maytronics power supplies no longer come with power cords. Ensure the power outlet is functioning properly and that it has not tripped the breaker in the fuse box. I tried to plug it into a different outlet and it didn't go on at all.
The power cable is not properly connected to the power supply inlet.
So you have to open it. I want to use it today tried to turn it on and it wouldn't fire up. Output voltage should be about 38 volts d/c. Check that the power supply is plugged in and turned on.
Unless you have a spare robot for parts, internal maytronics parts.
Lifestyle how your pool is the perfect background for meditation. If it cannot perform these A product tutorial overview video for maytronics's my dolphin power supply. Unplug the blue cable from the power supply unit (psu):
This is the power supply used on some dolphin cleaners.
After the leaves have changed colors and the days have turned colder, it’s time to. Check that there is voltage in the power socket in the wall. You can program the power supply at any time. To locate the replacement you'll have to get the model number/name of the cleaner or the p/n off of the power supply.
Check that the power supply is plugged in and turned on.
I know that it was the switch because i could not turn the unit off. Check that there is voltage in the power socket in the wall. If cleaner not starting up. Turn on the power supply.
Check that the power supply is plugged in and turned on.
The cleaner upside down on dry land and turn the power supply on. See the relevant section below for more details on each program.
