Note for older pressure washers: It's like it can't be pushed in deep enough to twist the end. Reviewed in the united kingdom on 30 june 2016.
Karcher VarioPower Spray Jet Lance Full Control VP 145 K4
If your machine cuts out occasionally, it could be because you are using an electric extension cable.
Just slightly drill the hole in the brass.
To store your pressure washer for winter: I'm not sure what the problem is because it has worked fine up until now. Find more about karcher karcher k2 vario pressure washer lance. Please try your search again later.
When i look in the end of the gun there's a spring and also a yellow.
There was a problem completing your request. Took me a while to narrow the problem down but my intermittent pressure drop outs were caused by a faulty vario lance, which was the original and 10 years old. Karcher k2 gun, can't attach lance. If people have k2 to k5 and don't want to spend so much money then i would stick to karcher vp145 vario power jet lance will be.
My foam lance has only recently started to refuse to mate with my karcher gun (on my kb4040 pressure washer).
The vps wand allows you to easily switch from low to high pressure, and everything between, while you clean. If the problem is not solved, then the fault is due to a damaged spill valve. Anyone else had this problem? Karcher pressure washer common faults (common problems, solved) karcher have been manufacturing pressure washers for more than 60 years, making them one of the world leaders when it comes to pressure washers.
Post by big bad boris » sun jun 21,.
This is the first position. Extension cables must always be 13 amp constant rating and no longer than 10 metres. I bought a new replacement vario lance for mine a few weeks ago and it's a right bugger to. Yes i had same problem the foamer was very tight and i decided not to force it any more.
The spill valve could easily be damaged by using not suitable chemical or detergents.
Since i removed and tried another attachment i can't get the lance back onto end of the gun. The water comes out motor hums trigger gun works. The trigger gun has 4 positions but regardless what pressure i put the lance on it remains on mix which is for using detergent. The vario power spray lance gives you the adjustability for all the different surfaces around your home such as:
Works in fits and starts, works fine for a few seconds, then it stops, and starts working fine for a few seconds again.
Please check your operating instructions for correct specifications. Fast delivery good and powerful vario power jet lance that is 160 bar = 2300psi max, it is compatible with k2,k3,k4,k5,k6 and k7, a little expensive, but strong and good design, i had mine replaced for k5 eco!ogic @ 145 bar = 2100 psi max. Dear mike husband, one reasin for this fault could be a damaged lance or turbo lance. Just slightly drill the hole in the brass connector and it will fit like a dream.
The pressure washer cuts out.
Fencing, bbqs, wheelie bins and garden. Try by replacing with new ones. With over 1,300 patents for designs and improvements they’re a pretty safe bet when it comes to buying a pressure washer. The fitting won't push into the spring loaded end of the gun in order to twist and lock into place.
I have a karcher k 6.85 m pressure washer that has developed an apparent.
The karcher k2 vario pressure washer lance is suitable for use with all k2 series karcher pressure washers and provides variable pressure control. And swearing at a power washer is not a way for a grown man to act. I have a karcher k2 and previously used the dirt blaster lance with no problems. When using the vario lance that came with the unit, as soon as i turn.
Livraison rapide partout en france.
Post by ird » sun jun 21. Foam lance well and truly stuck in the karcher. I am going to use a different attachment so it will fit my cobra petrol washer. A much improved design from the original model and works well, i am glad i changed it over and the price is a large improvement from the price.
