10.corner cap with a hole. Our instruction manuals often have the answer to your queries, saving you time and stress. This is crucial in the case of integrated appliances, where vents are required for this purpose.
Liebherr Monolith 36" (914MM) Integrated Fridge EKB 9671
All refrigeration appliances require ventilation to ensure correct operation.
For sufficient ventilation, your cabinet panel must not cover the back of the refrigerator.
The instructions apply to several models. Top hinge of the freezer door. Apply seal, removing backing tape as you progress. Only a qualified person must install this appliance.
If your new fridge freezer supplies water through a dispenser, it needs to connect to an inlet valve via a pipe that you’ll find inside.
All refrigeration appliances require ventilation to ensure correct operation. Installed correctly and with the above taken into account an integrated fridge, freezer or fridge freezer is no more or less reliable than a normal freestanding unit but, it has to be installed correctly and this is the very first thing that you should ensure is correct. Ensure the air outlet behind the refrigerator is at least 200cm² in area. Taking back of housing off integrated fridge freezer.
Bottom hinge of the refrigerator door.
During use avoid overcrowding shelves, as this reduces airflow. Bottom hinge of the freezer door. Uonly install the appliance in robust, stable kitchen units. • do not install or use a damaged appliance.
Activesmart™ integrated refrigerator freezer rs36w80 and rs9120w models.
Check the direction of the waterflow on the filter attached to the water hose. Installing a water dispenser fridge freezer. ‘inline filters’ are fitted on the outside as part of the inlet pipe, but others are internally fitted and accessed inside the fridge. First, turn off your water supply and unplug your fridge freezer.
Secure the units against tipping.
• always take care when moving the appliance as it is heavy. A minimum of 200cm 2 of ventilation must be provided at. Carefully follow all unpacking and installation instructions to ensure the appliance is correctly connected and fitted prior to use. Text relating only to specific appliances is marked with an asterisk (*).
Rear feet onto base, level and gently slide into position.
For complete installation specific to your appliance, follow the ‘installation Tion, two appliances next to one another, build the appliances into separate kitchen units. Watch this short video to see how simple measuring up for a brand new integrated fridge freezer can be. • remove all the packaging and the transit bolts.
This is crucial in the case of integrated appliances, where vents are required for this purpose.
Unscrew the water connector on the back of your appliance, attach the water hose and then fasten the screw tight with a spanner. Instructions for action are marked with a , the results of action are marked with a. This dual installation guide is only supplementary instructions for installing two appliances side by side. Remove the hinge cover to push a hook.
I need to replace an integrated fridge freezer, but need to make sure the fridge doors will be the right length for the 'wooden'.
During installation locate refrigerator to the coolest part of the room. Find out where you can find the installation guide for your beko fridge, plus answers to more beko fridge freezer faqs. Whether it’s instructions on setting up your appliance or tips on general maintenance, our handy manuals are full of support which you can flick through at any time. Whether you have your appliance’s model number ready or need.
The integrated fridge freezer is 21' deep but the housing is only 20.
Avoid areas of direct sunlight, or near heating ducts, registers, or other heat producing appliances. Remove the wire cover and the door space cap. Bottom hinge filling plug of the freezer door. • follow the installation instruction supplied with the appliance.
Ensure your refrigerator has adequate ventilation as shown in the installation instructions.
Ualign the kitchen unit using a spirit level and marking square My hubby is installing our new kitchen. Power off and check inside. Top hinge cover of the refrigerator door.
You’ll also need to fit a filter to get clean, drinkable water.
Ucheck the wall thickness of the adjoining cabinets: Remove 2 screws on the upper hinge and put out the fridge door from the middle hinge. Maintain a gap of at least 50mm between appliances, if they are installed side by side. 1 contents 1 safety and warnings 2 dual installation.
Integrated fridge freezers blend seamlessly into any style as they can be fitted behind cupboards that match the design of the rest of the room.
We’ll show you all the tips and dimensions you need t.
