Fermacell jointstik 1 mm glued joint. Create the perfect watertight wet room, with fermacell powerpanel h20 cement based boards or se fermacell powerpanel h20 in any spa, fitness or swimming fa. Fermacell h20 powerpanel fine surface treatment fst 10l bucket 79090 fermacell h20 powerpanel fine surface treatment fst 10l bucket 79090.
Fermacell Gypsum Fibreboard 2400mm x 1200mm x 15mm Tapered
Fermacell® is a registered trademark and a company of the xella group.
Due to their good fire protection properties, they can also be used for border constructions.
It is ideally suited for filling over screw heads and glue joints, for smoothing and filling irregularities on walls, ceilings and floors. Fine surface treatment is ready mixed and can be used on the boards to achieve a smooth surface read. Base render coat and final render finish for fermacell powerpanel hd. It is ideally suited for filling over screw heads and glue joints, for smoothing and filling irregularities on walls, ceilings and floors.
1 litre per m2 per 1mm thickness of coverage.
1 ltr per / m2 per 1mm thickness of coverage It is suitable for cement based substrates both indoors and outdoors, and for wet areas. Domestically, this includes wet rooms, bathrooms, showers, toilets and. For providing a smoother finishing to fermacell h2o boards where a paint finish is required.
All powerpanel h2o joints must also be reinforced with an alkali resistant 70 mm glass fibre mesh reinforcement tape embedded into the powerpanel surface finish.
Powerpanel fine surface treament is a ready mixed filler and skim coat that patches screwheads, fills gaps and dresses edges. For providing a smoother finishing to fermacell h2o boards where a paint finish is required. For providing a smoother finishing to fermacell h2o boards where a paint finish is required. Designed by fermacell for use on powerpanel, it meets the 200°c stability rating of the boards.
3 ltr tub / 3.6 kg.
10 ltr tub (colour grey lid) approx. It is suitable for cement based substrates both indoors and outdoors, and for wet areas. 1 litre per m2 per 1mm thickness of coverage. For giving powerpanel h20 boards a skim type finish.
Concrete based lining boards are used in applications where plastboard would not be suitable.
Fire stopping around service penetrations. For exterior and interior use. 35 mm powerpanel screws at 250 mm centres. Frame out openings with the same number of layers of board as per above specification.
1 litre per m2 per 1mm of thickness.
For exterior and interior use. Fermacell powerpanel h2o fermacell powerpanel h 2 o is the water resistant construction board for walls, floors and ceilings. It has been specifically developed for use in rooms where there are damp conditions. If you have any questions regarding the application, please contact the fermacell technical advisors.
It is suitable for cement based substrates both indoors and outdoors, and for wet areas.
