Owner’s operation manual for dt series 3 ½ digital multimeter. 9 extech ex330 autoranging mini multimeter user manual. Otherwise, the protection provided by the meter may be impaired.
Equus 4320 Digital Multimeter (10 MegOhm) User Manual
(when the bluetooth is activated, this function is disabled.)
For that reason, requires that the transient withstand capability of the equipment is made known to the user.
The multimeter automatically enters the sleep mode if the rotary switch is not moved or a key is not pressed for 15 minutes. Some models also provide transistor test function, signal output or performing continuity test. Remove the test leads from the multimeter before you open the battery cover. A multimeter is has three parts:
To use safely, each measurement can not last for more than 10 seconds, and the interval between each measurement must be more than 15 minutes.
7 tacklife cm02a multimeter user manual. When using the test leads, keep your fingers behind the finger guards on the test leads. Higher resolution of up to 9999 in 1.safety information 2 when servicing the multimeter, use only the specified replacement parts.
Technical specification 3.1 general characteristics display :
1 * dta handheld digital multimeter 1 * test lead 1 * instruction manual. Security information warning people who use this meter should pay special attention to it, because the improper use might cause electric shock or damage to the meter. 4 craftsman multimeter user manual. Multimeters (hereafter referred to as the “meter”) comply with:
1.safety information 2 when using the test leads, keep your fingers behind the finger guards on the test leads.
Table of contents title page 1. To print the manual completely, please, download it. The dtb is a digital multimeter that can measure ac and dc voltage, dc current, the meter unpacks with a small user manual in which the manufacturer. Security information 2.1 1.1 preparation 2.2 1.2 usage 2.3 1.3 mark 2.4 1.4 maintenance 3 2.
Remove the test leads from the multimeter before you open the battery cover.
Inputs may be connected to ac mains power (up to 600 vac) under category ii overvoltage conditions. Astroai user manual digital multimeter note: 8 uei test instruments dl369 multimeter user manual. The meter is a handheld 31/2 digital multimeter for measuring dc and ac voltage, dc current, resistance, diode and transistor with battery operated.
Complete you bow to that you require to acquire those all needs as soon as having significantly cash?
Some of the features of your instrument are: Remove the test leads from the multimeter before you open the battery cover. Display selection knob ports the display usually has four digits and the ability to display a negative sign. The dtd digital multimeter is a basic tool, which anyone with an.
Use caution when working above 60 v dc, 30 v ac rms, or 42.4 v peak.
• when using this multimeter, the user must observe all normal safety rules concerning: 1.safety information 2 when servicing the multimeter, use only the specified replacement parts. Such voltages pose a shock hazard. Operating manual is avalible here.
Front panel i 1.8.8.8 0) ® off.
A test td830d will appear between the and “com” jacks. 1 * dta handheld digital multimeter 1 * test lead 1 * instruction manual. Specifications 4.1 3.1 review 4.2 3.2 technical index. Use caution when working above 60 v dc, 30 v ac rms, or 42.4 v peak.
Fully read and understand this manual before using this instrument.
Contents hide 1 user manual 1.1 professional digital multimeter fy76 2 1. The dta multimeter offers you several amplitudes of measurement with which to test electrical components for voltage, resistance or continuity. Please follow the actual safety rules and safety measures as specified in. To avoid possible electric shock or personal injury, and to avoid possible damage to the meter or to the equipment being tested, adhere to the following rules:
The safety rating of the multimeter:
Digital multimeter read and understand this manual before using the instrument failure to understand and comply with the warnings and operating instructions can result in serious or fatal injuries and/or property damage. • all vom functions plus conductance and continuity (8 in all) are included as standard. Digital multimeter operator’s instruction manual. Professional digital multimeter fy76 1.
Description 3.1 2.1 component name 3.2 2.2 switch, button and input jack description 3.3 2.3 lcd display 4 3.
Such voltages pose a shock hazard. When using the test leads, keep your fingers behind the finger guards on the test leads. 01 02 stresses are variable; To avoid false readings, which may lead to possible electric shock or personal injury, replace the battery as soon as the low battery indicator appears and flashes.
General instructions 1 1.1 precaution safety measures 1 1.1.1 preliminary 1 1.1.2 during use 2 1.1.3 symbols 4 1.1.4 instructions 5 1.2 protection mechanisms 6.
6 fieldpiece hs33 multimeter user manual. The meter cannot be used to test ac current and cannot be used to test ac voltage To avoid the risk of electric shock or the damage of the multimeter or other equipment, do not connect to any input Set of test leads (one black and one red) 3.
