Ocean insight offers cuvette holders for a variety of absorbance and fluorescence sampling needs. 170mm x 50mm x 15mm. Single cuvette holder, temperature adjustable by water/coolant circulation, fitted with integrated probe for sample temperature monitoring by spectrometer operating software.
QA24, 150mm Path Length Cuvette Holder, Adjustable CotsLab
Both cuvette holders are discussed in this manual.
When viewing or detecting fluorescence or other signal through the sides of the cell, the apertures minimize reflected or scattered light from the cell input and output faces.
It has an 8 mm wide by 29 mm high rectangular aperture on all four sides. With spacers, both cuvette holders will hold cuvettes as small as 1mm, 2mm and 5mm. Options are available to meet your fill volume requirements and measurement needs. It is a useful accessory for laboratory work, calibration development, or feasibility studies.
All cuvette holders have a 5mm wide slit to hold filters and a cover to prevent ambient light from entering the light path.
Cuvette mounts (for lightpaths below 5mm) from 103.00. Includes 2 uv grade collimating lenses. With proper care and maintenance, cells can be reused effectively for as long as they remain free of scratches, cracks, and similar imperfections. Filter slots are provided for holding 50 mm square filters.
The filter is limited at this time.
This sample holder is included as part of the standard system. The selection of agilent spectrophotometer liquid sample holders can be used with a variety of cuvette types. The cuvette holder is compatible with mightex’s fiber coupled led sources, mightex’s spectrometers, as well as any other light sources or spectrometers with. Cuvette holder long pathlength precise and secure holders.
It has an 8 mm wide by 29 mm high rectangular aperture on all four sides.
Holds various rectangular cuvettes from 5mm up to 50mm pathlength. Specular reflectance grazing angle accessories, agate mortars & pestles, horizontal atrs, variable temperature. Cuvette holders are available for absorbance and fluorescence sampling, and integrate seamlessly with spectrometers, light sources and optical fibers. To avoid twisting and breaking delicate fiber optic cables, always
Microcell holders are available for the cary 60.
Offers precision temperature control and highly responsive ramping. The 13950 shielded cuvette holder holds standard 10 x 10 mm cuvettes atop an optical rod. Complete pike peltier cuvette accessory includes peltier cuvette holders, temperature controller and liquid recirculator. Qa20, rack for 12.5*12.5mm (10mm lightpath) cuvettes.
Adjustable cuvette & spectrophotometer cell holders, cuvette & spectrophotometer cell washers, sealed liquid spectrophotometer cells, spectrophotometer recording pens & square cuvette & spectrophotometer cell holders are available.
Furthermore, the standard cuvette holder provides easily change. It is built with the purpose of giving flexibility to your setup. The 13950 shielded cuvette holder holds standard 10 x 10 mm cuvettes atop an optical rod. The cuvette holder is a convenient, compact, rugged lab sample interface that is easy to use and even easier to service.
When viewing or detecting fluorescence or other signal through the sides of the cell, the apertures minimize reflected or scattered light from the cell input and output faces.
The caps are produced from low density polyethylene (ldpe) and…. Full functionality will be available soon. When a 50 mm tall cuvette is used, there will be 1 mm of clearance between the cuvette stopper and the cover, as seen in the image to the right. The cuvette holder cover is able to accommodate cuvettes up to 50 mm (1.96) tall, including the cap or plug, as well as the filter holder included with the cvh100(/m).
When in storage, the racks are stackable.
With an operational range from 190 to 2500 nm, multipurpose cuvette holder includes two 12.7 mm collimating lenses with sma 905 connectors and adjustable focus and offers the possibility of adding sio 2 coated aluminium mirrors to enhance the. Suitable for long pathlength cuvettes.
