All AQUAPANEL Maxi Screws have a special corrosion-proof coating which gives a guaranteed 720 hours corrosion resistance in a salt spray test. The wet area laminate lining serves as an economical alternative to traditional ceramic tiles with the non-porous nature of the material and the absence of grout reducing the risk of mould. The drive is the common dry lining system PH2.
Pin On Knauf
Scopearea of application AQUAPANEL Maxi Screw SN AQUAPANEL.
General Information Knauf AQUAPANEL Maxi Screws SN39 Collated are corrosion-protected screws for fixing Knauf AQUAPANEL Cement Board Indoor to light gauge steel profiles up to 07mm and timber and Knauf AQUAPANEL Cement Board Outdoor to timber.
They have a needle point and countersunk heads. Aquapanel Screws Stainless Steel Screws have been specially developed for fixing AQUAPANEL Cement Board Outdoor on to metal and timber. 250 pcsbox 11 m2. Exterior Joint Tape has an alkali-resistant coating.
It is applied to the joints and embedded in Joint Filler Grey.
40mm stainless steel screws specially developed for fixing Knauf AQUAPANEL Cement Board Outdoor to timber substructures. AQUAPANEL Maxi Screws have been specially developed for fixing AQUAPANEL Cement Board Indoor on to metal and timber substructures. The 39mm effective screw length L40mm is adequate for a double layer of boards on a metal substructure. Knauf AQUAPANEL Exterior Maxi Screws.
Knauf AQUAPANEL Exterior Maxi Screws have been specially developed for fixing Knauf AQUAPANEL Cement Board Outdoor onto heavy gauge steel profiles 08mm 20mm as part of the Knauf AQUAPANEL Exterior system.
Manufactured from inorganic materials and highly resistant to water and mould AQUAPANEL Cement Board Indoor is a real lightweight making it easy to handle and fast to install with superb flexibility for curved walls too. Its surface offers the basis for a multitude of design options comprising finishes in all quality grades. Knauf Aquapanel Interior screws ensure a quick and easy installation with no special tools required. Knauf Aquapanel Interior is ready keyed to take tiles up to 50 kgm2 as soon as the boards are installed.
3The screws are Aquapanel façade stainless steel screws 40mm long and 40mm shank diameter.
4The value used for the screws is the rim hole pull through value of 730N and applying a factor value of 3 giving a screw value of 243N. 5Wind loading checked for a basic wind speed of 26ms as per Diagram 15A of TGD to Part A of the Building Regulations 1997 to 2007 and BS 6399- 21997. 6It is assumed that the building is a maximum of 15m above ground level and the topography is reasonably flat. Knauf AQUAPANEL Cement Board Outdoor.
Knauf AQUAPANEL Cement Board Outdoor is a tough cement board for exterior use with a Portland cement and aggregate core and coated glass fibre mesh embedded in the back and front surfaces.
It offers all the benefits of a dry panel system with the strength of brick and block. Aquapanel Maxi Screws SN39 can be used for both wall and ceiling applications in interior and exterior applications. Aquapanel Maxi Screw SN39 is suitable for a single or double layer boards on a metal framework or a single-layer panel on a wooden framework. Fix strapping with nails or screws renovations When using Aquapanel to reline over existing walls or ceilings previously painted surfaces should be cleaned then scuffed with coarse abrasive paper to form a key for adhesion Old shower linings must be removed before installation of new.
You should prime the Aquapanel boards mixed 21 12 hrs before u start tiling With their primer.
U dont need to use Keraquick with latex Plus its an S2 and unecessary. The screws hold the board down. Any SPF will suffice. AQUAPANEL Maxi Screw SB 25 can be used for a single layer of boards.
All AQUAPANEL Maxi Screws have a special corrosion-proof coating which gives a guaranteed 720 hours corrosion resistance in a salt spray test.
The drive is the common dry lining system PH2. Scopearea of application AQUAPANEL Maxi Screw SN AQUAPANEL Maxi Screw SB. 42mm x 40mm Aquapanel Maxi SN40 needlepoint screws have been specially developed for fixing Aquapanel Cement Board on to timber and metal frameworks. Aquapanel Maxi Screws SN40 can be used on wall and ceiling applications in interior and exterior applications.
Aquapanel Maxi Screws SN40 a.
When the adhesive begins to dry after 1 - 2 hours you should fasten the AQUAPANELCement Board Indoor with 9 stainless steel screws per m² min. Suitable for fixing Wickes Aquapanel to metal up to 07mm thick or to timber A steel core screw that has a specialist galvanisation and ceramic coating ensures these screws will never rust and enhances suitability for wet and high alkaline environments Avoids risk of corroded screws leading to tile popping Screws have drill bit tips. Laminex Aquapanel wet area panelling can provide the perfect solution for applications including bathroom walls laundry splashbacks and lining for showers.
