Aquapanel® cement board indoor is the perfect board for exceptionally light performance, reliability and stability even in the most challenging wet and humid. Knauf aquapanel develops innovative building materials. The ends are cut square and edges are reinforced for extra strength (the
KNAUF AQUAPANEL AQUAPANEL® Cement Board Outdoor
Knauf aquapanel ® cement board outdoor has a mass of 16kg/m².
Knauf aquapanel develops innovative building materials.
It therefore provides the best conditions, especially in cases where a very low construction height. A bending radius of 1m can be achieved without the need to cut the board into strips. Developed by knauf, the aquapanel cement board system provides architects and distributors with a high quality and extremely economical alternative to traditional methods of construction, such as brick and block. 3) mark everything first before installing it, plumb down from your bath at the ends, mark the floor, twang a line through, then set your finish line back from that, so when it goes in, you have the line ready to go, no messing about.
Aquapanel cement board technology provides new construction possibilities with technical and logistical advantages.
As an inorganic cement board, aquapanel ® cement board floor tile underlay is resistant to water or mildew and is therefore perfectly suited for wet and humid floors. Manufactured to be durability and robustness, these shower panels are resistant to discolouration which means they stay clean and fresh for longer. 6) when that is done, i then fired some expanding foam along the gap at the bottom. Besides its stability, the aquapanel ® cement board floor tile underlay is very light and only 6 mm thick.
An extremely durable tile backer.
Aquapanel® is the world's leading premium brand for cement boards in the drylining industry. At 11kg/m2, the new board is 25% lighter, making the installation easier and faster than before. Aquapanel cement board system technology sets new standards for the design and construction of buildings throughout ireland. Siniat aqua board 1200 x 850 x 12.5mm.
Accommodates the weight of tiles up to 50kg per m².
The board is the ideal exterior render substrate and can be used for many other surface finishes, such as paint or masonary facade systems. Aquapanel ® cement board outdoor is an innovative way to build exterior walls and façades. As the board is lightweight and only 900mm wide, it means that it can easily be worked from scaffolding, rather than having to be cut on the ground and carried to the fixing position. Get a selco trade card or login now.
Knauf aquapanel exterior cement board is used as part of an exterior system for use on timber frame, timber battens, sip systems and metal framed structures.
Aquapanel® is the world's leading premium brand for cement boards in the drylining industry. Aquapanel sell a joint adhesive especially for this job although a good quality silicon does just as well. Resistant to mould and mildew. It retains strength even if fully immersed.
Aquapanel ® cement board indoor is a solid, durable tile backing board for interior use.
We would like to show you a description here but the site won’t allow us. It is also important to tape the joints prior to tiling just as you would plasterboard. The system provides a fast, high quality and extremely economical alternative to traditional methods of construction. Bathroom wall panels are the perfect alternative to tiles, creating a waterproof finish for the bath or shower area.
It is a lightweight board that is easy to install and suitable for use in indoor wet and humid areas, resisting the development of mould and mildew.
Aquapanel cement board technology provides new construction possibilities with technical and logistical advantages. Takes up to 50 kg/m² as soon as boards are installed. The adhesive or silo is applied to the board edge before the boards are joined and the excess scraped off once the board is fitted. Knauf aquapanel ® cement board indoor is a tough impact and water resistant glass fibre reinforced cement tile backer board for walls.
1200mm long board is 17.28kg and 2400mm long board is 34.56kg.
Tile backer boards make up the foundation of your wet room, providing a waterproof base on which to place your tiles. Quick and easy to install.
