Durable plastic bath screen seal that prevents water leaking between the screen and the bath. Push fit wall channel trims inside view 22 inside view using the adjustment in the top bearings, ensure that the bottom bearings are fully engaged into the bottom cill rail. Remove the wall bracket from the bracing bar, mark the location of the fixing hole.
Aqualux Shine Bathscreen 850 x 1500 x 6mm Homebase
Aqualux products limited fleming road, hinckley, england le10 3du uk
• check that the bath has been installed correctly and that it is level (fig.
Aqualux spares fittings pack, covers & fittings out of stock: This shower screen is available at qs supplie. Use spirit level to ensure glass panel (b) is level. It represents the best of both worlds for those who want style and substance.
In00316 (rev b) folding bath screen • instruction suitable for both right and left hand fixing.
J a g a a b. • check that there is suffi cient space on the bath for the product and that the screen movement does not foul. Aqualux spares fittings pack, covers & fittings : Fit the mounting and wall brackets onto the bracing bar and place it on top of the locating pins.
(see fig.5) use 3mm hss drill bit to drill 3mm dia.
Screw the bath screen into the wall channel, capping the screws when done. Aqualux spares fitting pack, glass shelf low stock: Here i take you through the whole installation process to fit a glass shower panel.installing a glass bath screen. With quality shower trays to match your enclosure.
Drill the fixing hole, tap.
A), tiled down onto and sealed to the manufacturerʼs guidelines. Are you bored with the same design shower curtains, then have a look at aqualux aqua 4 fold bath shower screen. (see fig.5.1) fix glass panel (b) to wall channel (a) using cross head screwdriver and no.8 x ⅜” screws (h). I needed a fittings pack for a 4 panel bath screen.
Adjustment may also be used to ensure that the door closes correctly against the magnet seals.
I duly did this and the fittings pack was sent out the same day. Screw the wall channel to the wall and insert the bath screen into the wall channel. (see fig.5.2) cover screw heads using screw cover caps (i). Please refer to the diagram below to ensure that the correct rollers are fitted to the top and bottom of the door.
Mark the position with a pencil.
Offering splash protection, the elegant curved sail bath screen opens outwards for easier access. Fit the seal to the bottom of the bath screen. Good quality shower screen but no instructions on how to fit it, and as others have said you need to screw the holes yourself to fit the screen to the bracket, they supply a drill bit but ours snapped and scratched the screen, definitely a two person job to fit and you need to have a bit of a diy head to work it out yourself. Aqualux products limited fleming road, hinckley, england le10 3du uk email:
Drill 3 evenly spaced holes through both the wall channel and bath screen using the recommended drill bit size.
